http://ir-heat-wave.com/ms/tags/pc/ Recent content in PC on Efficient IR Heat Waves Hugo ms Fri, 03 Jul 2026 13:31:13 +0800 http://ir-heat-wave.com/ms/posts/can-i-use-pet-lamps-for-pc-preforms/ Fri, 03 Jul 2026 13:31:13 +0800 http://ir-heat-wave.com/ms/posts/can-i-use-pet-lamps-for-pc-preforms/ <p><img src="http://ir-heat-wave.com/images/4bd32906be4f00b41d930f302011e1aa.png" alt="Bolehkah saya menggunakan lampu PET untuk PC preforms"></p> <p>Dalam proses pembentukan produk menggunakan kaedah blow molding, kesilapan dalam campuran bahan mentah bukanlah sesuatu yang teoretikal semata-mata—ia akan menyebabkan masalah seperti sisa bahan yang tidak digunakan, proses pengembangan bahan yang tidak sekata, serta masa henti yang tidak dijangka. Soalan yang sering diajukan ialah adakah lampu PET boleh digunakan untuk memproses bahan PC pada mesin Sidel, Krones, SIPA, Husky, SACMI, atau Nissei ASB. Jawapannya ialah kadang-kadang ya, tetapi hanya jika sistem pemanasan disetkan agar sesuai <a href="https://o-yate.net">dengan</a> ciri-ciri termal bahan PC, dan spesifikasi lampu tersebut juga perlu sesuai dengan reka bentuk mesin tersebut.</p> http://ir-heat-wave.com/ms/posts/pc-preform-heating-zone-controller/ Mon, 01 Jun 2026 22:07:09 +0800 http://ir-heat-wave.com/ms/posts/pc-preform-heating-zone-controller/ <p><img src="http://ir-heat-wave.com/images/5794ff7eeb8a3f385a2f2c8c2d2ea62b.png" alt="Pengawal zon pemanasan pra bentuk PC"></p> <p>On the blow molding floor, the heating tunnel is where uptime gets decided. When preform temperature starts drifting, you pay for it in PET waste—thick walls, blown seams, or stretch that’s all over the place. You don’t need more heat. You need heat you can count on, zone by zone. That’s what the PC preform heating zone controller brings to the line.</p> <h2 id="what-matters-under-the-hood">What matters under the hood</h2> <p>We built the controller around short-wave infrared emitters and a closed-loop PID strategy that measures and corrects on the fly. It’s engineered to match the OEM heating-zone <a href="https://o-yate.com">architecture</a> on blow molders, with 1:1 parameter compatibility for voltage, power density, and emitter interface. You get stable output in each zone, and the temperature repeatability that keeps the preform wall within your process window. It supports common halogen/infrared lamp fixtures and standard connectors, so you can swap out a zone without tearing the whole tunnel apart.</p>